Programming Universal Remote Codes for Sansui TV [2024]

Managing multiple remotes for your Sansui TV can be a hassle, but with a universal remote, you can simplify your setup. This guide will show you how to program your universal remote using the correct codes for your Sansui TV. By following the easy steps below, you’ll be able to control your TV with one remote.

Step-by-Step Guide to Program Your Universal Remote

Step 1: Gather Your Equipment

Before you begin, make sure you have everything ready:

• Your Sansui TV
• The universal remote control you want to program
• Fresh batteries for the remote (if needed)

Step 2: Find the Correct Remote Code

You’ll need the right code for your Sansui TV to program your remote. These codes are available in 3-digit, 4-digit, or 5-digit formats. You can find them in the list below. Take note of the code that matches your TV model.

Step 3: Enter Programming Mode on the Remote

Most universal remotes have a dedicated button or a combination of buttons to enter programming mode. Check your remote’s user manual for specific instructions. Typically, it involves holding down the TV or Setup button until a light on the remote turns on.

Step 4: Input the Code

Once in programming mode, it’s time to enter the code:

1. Press the TV button on the universal remote to select TV mode.
2. Input the Sansui TV code you found in the list.
3. Test the code by pressing the Power button. If the TV turns on or off, the code is correct.

Step 5: Test the Remote Functions

Make sure the remote works by testing various functions like changing channels, adjusting volume, and accessing the menu. If everything works, you’re good to go.

Step 6: Save the Code

To avoid reprogramming in the future, save the code by following your remote’s instructions.

Step 7: Done! Enjoy Your Simplified Setup

You’re all set! You’ve successfully programmed your universal remote to work with your Sansui TV. Now you can control your TV and other devices with just one remote.

Universal Remote Codes for Sansui TV

Here is a comprehensive list of 3-digit, 4-digit, and 5-digit codes for Sansui TVs. Depending on your universal remote, you’ll need to use the correct code format.

3-Digit Universal Remote Codes for Sansui TV

• 985, 030, 527
• 834, 908, 060
• 011, 748, 171
• 208, 227, 310
• 865, 750, 029
• 211, 055, 055

4-Digit Universal Remote Codes for Sansui TV

• 1337, 5006, 0698
• 0394, 5871, 1052
• 1556, 1208, 0135
• 0888, 0310, 6071
• 6061, 0806, 5441
• 2832, 0264, 1230
• 0171, 1107, 1267
• 5010, 5010, 5010

5-Digit Universal Remote Codes for Sansui TV

• 11670, 11892, 12258
• 13559, 20695, 11904
• 13700, 11938, 12282
• 10463, 10173, 13520
• 11938, 13700, 13700

Codes for Popular Universal Remotes

RCA Universal Remote Codes for Sansui TV

• 1191, 1282, 1208
• 1284, 1290, 1290

GE Universal Remote Codes for Sansui TV

• 0135
• 0310

One-For-All Universal Remote Codes for Sansui TV

• 0135
• 0310

Philips Universal Remote Codes for Sansui TV

• 0115
• 0632

Comcast Universal Remote Codes for Sansui TV

• 11935, 12282, 11911
• 0463, 10463, 10165
• 11904, 11670, 11409
• 10173, 12258, 10171
• 11892, 11929, 11929

Troubleshooting Tips

If the remote isn’t working as expected, try these steps:

• Double-check the code you entered.
• Test another code from the list.
• Make sure the remote has fresh batteries.
• Refer to your remote’s user manual for further instructions or troubleshooting steps.

By following this guide and using the codes listed above, you’ll have your Sansui TV fully controlled by your universal remote in just a few minutes!