Programming Universal Remote Codes for Auria TV

Greetings, fellow tech enthusiasts! In a world where simplicity and convenience reign supreme, the universal remote control has emerged as a true hero in the realm of home entertainment. If you’ve found your way to this page, it’s likely because you’re in search of Universal Remote Codes for your Auria TV, and you’ve come to the right place. Prepare to unlock the power of seamless control.

In this user-friendly guide, we’ve curated an up-to-date and comprehensive collection of Universal Remote Codes tailored specifically for Auria TVs. Whether you require 3, 4, or 5-digit codes, we’ve got you covered. Our mission is to make your life easier by equipping you with the tools to effortlessly program your Auria TV with your preferred universal remote control.

4 Digits Universal Remote Codes for Auria TV

• 2014
• 1221
• 1171
• 1411
• 2121
• 2855
• 2277
• 0061

5 Digits Universal Remote Codes for Auria TV

• 11423
• 10017
• 11265
• 10178
• 10856
• 11178

RCA Universal Remote Codes for Auria TV

• 12087

Programming Universal Remote for Auria TV

Programming a universal remote control for an Auria TV can be a convenient way to control your TV, especially if you’ve lost the original remote or want to reduce the number of remotes you use. Universal remotes are designed to work with a wide range of brands and models, including Auria TVs. Here’s a detailed guide on how to program universal remote codes for an Auria TV:

Note: Before you begin, make sure your universal remote control is compatible with Auria TVs. Check the user manual or manufacturer’s website for a list of supported brands and models.

Step 1: Gather Information

1. Find Your Auria TV Model: Locate the model number of your Auria TV. It is usually located on a label on the back of the TV or in the TV’s user manual.
2. Check the Universal Remote: Ensure that you have the universal remote control you want to use and its user manual. The manual will contain a list of setup codes for various TV brands.

Step 2: Prepare Your Universal Remote Control

1. Insert Batteries: Open the battery compartment of your universal remote and insert the required batteries. Make sure the batteries are fresh and in good condition.
2. Turn On the TV: Power on your Auria TV manually using the power button on the TV or any other remote if available.

Step 3: Find the Setup Code

1. Consult the User Manual: Refer to the user manual for your universal remote control. Look for a section that lists codes for programming your remote to control different TV brands.
2. Auria TV Codes: Look for the codes specific to Auria TVs in the manual. These codes are usually numerical and may be listed under “Auria,” “Auria TV,” or a similar heading.
3. Multiple Codes: Some remotes provide multiple codes for a single brand. This is because different models of Auria TVs may require different codes. Make a note of these codes.

Step 4: Programming the Universal Remote

1. Enter Programming Mode: Follow the instructions in your universal remote’s user manual to enter the programming mode. This typically involves pressing a combination of buttons, such as “Setup” or “Code Search,” and then holding down a button (e.g., “TV” or “Power”) until a light indicator on the remote turns on or blinks.
2. Enter the Code: Once in programming mode, enter one of the Auria TV codes you found earlier. This is often done by using the numeric keypad on the remote control. Enter the code carefully, and the light on the remote should blink or turn off if the code is accepted.
3. Test the Remote: After entering the code, point the remote at your TV and press the “Power” button. If the TV turns off, the code is correct. If not, repeat the process with another code from your list.
4. Save the Code: If you find a working code, save it by following the instructions in your remote’s manual. This typically involves pressing a specific button or sequence to store the code.
5. Test Other Functions: Once the power function is working, test other buttons on the remote, such as volume and channel control, to ensure they work correctly with your Auria TV.
6. Exit Programming Mode: After successfully programming your remote, exit the programming mode by following the instructions in the user manual.

Step 5: Final Testing

1. Test All Functions: Make sure to test all functions of your universal remote control to ensure it works seamlessly with your Auria TV.
2. Save the Manual: Keep your universal remote control’s user manual in a safe place for future reference, as you may need it to reprogram the remote or add other devices.

That’s it! You have successfully programmed your universal remote control to work with your Auria TV. If you encounter any issues or the remote doesn’t work with your TV, refer to the troubleshooting section in the remote’s manual or consider trying a different code from the list.